1) Cleaning: All Loose Rust, Mill Scale, Dirt, Oil, And Grease Must Be Removed.
2) Methods: Common Techniques Include Abrasive Blast Cleaning (To Standards Like Sa 2.5), Power Tool Cleaning (SSPC-SP-3), Or Using Specialized Rust Removers Like Sika Rustoff-100
3) Special Cases: Some Primers, Such As Corrverter MCI , Are Designed For Application Directly Onto Rusty Surfaces Where Intensive Cleaning Is Difficult

1) Mixing: Thoroughly Mix The Product (E.G., Adding Powder To Liquid) For Roughly 3 Minutes Until A Brushable Consistency Is Reached.
2) First Coat: Apply The First Layer To The Cleaned Reinforcement Within The Specified “Pot Life” (Often 20–30 Minutes).
3) Second Coat: After A Waiting Period (Typically 1–3 Hours), Apply A Second Coat For Optimal Protection.
4) Curing: Allow The Treatment To Cure (E.G., 24 Hours For Cementitious Bases) Before Pouring New Concrete.