Leakage And Repair Solutions Generally Refer To A Systematic Process Of Identifying, Containing, And Permanently Fixing Unwanted Fluid Or Gas Escape In Structures (Like Homes) Or Industrial Systems. These Solutions Range From Simple DIY Fixes Like Sealants To Advanced Industrial “Online Leak Sealing” That Repairs Pressurized Pipes Without Shutting Them Down.
Podium Waterproofing
1) Surface Preparation:
I. Clean the concrete slab thoroughly, removing dust, debris, and loose mortar.
II. Repair cracks and holes using polymer-modified mortar or epoxy.
III. Conduct a pre-ponding test for 24–48 hours to identify existing leaks in the structural slab.
2) Detailing (Coving & Bore Packing):
I. Create 50mm x 50mm coving (angle fillets) at all wall-to-floor junctions using polymer mortar to prevent water from pooling in corners.
II. Seal pipe penetrations (bore packing) with non-shrink grout.
3) Priming: Apply a specific primer (e.g., polyurethane or acrylic-based) to ensure maximum adhesion between the slab and the membrane.